PRODUCTS
Please see our online catalog or contact our sales department for more information.
KEVLAR PACKING
STYLE 6500 Aramid fiber braided packing is made of Du Pont’s continuous filament Kevlar yarn impregnated with PTFE emulsion and processed with lubricant. As the strength and module of Kevlar is as high as the steel-like strength. So this packing compared with other kinds of braided packing. They can resist more serve media and higher pressure. It can be installed separately or as end rings with other kinds of packing to combine different characteristics into seals packing ring set.
KEVLAR FIBER SILICON CORE PACKING
STYLE 6700SC is combines a resilient silicone rubber core with the heat resistanted Dupont’s Kevlar fiber. The elastic rubber core gives the packing better memory, allowing it to withstand radial shaft motion and vibration while maintaining excellent leakage control with minimal gland adjustments.
CORNER PTFE KEVLAR PACKING
STYLE 6500 PTFE is pure PTFE yarn braided packing incorporated with pure 100% Dupont’s Kevlar yarn throughout the four corners. This structure enhances the lubricating ability of Aramid and reinforced the strength of the pure PTFE packing. Good silding properties and thermal conductivity.
CORNER GRAPHITE-PTFE KEVLAR PACKING
STYLE 6500G is highly-quality combination of PTFE with graphite incorporated yarn with corner of Kevlar fiber, to prevent gap extrusions within the high pressure and temperature range.
CORNER ACRYLIC KEVLAR PACKING
Composite Acrylic and Kevlar braided packing was pure aramid filament corners inter braided for strength and abrasion resistance combined with Acrylic composite filaments in the seams to produce a high performance chemically resistant packing.
CORNER CARBONIZED KEVLAR PACKING
Kevlar and Carbon Composite Packing is made of High-quality special yarn, It was impregnated with PTFE emulsion, with corner of Kevlar fibre braided packing, It has better sliding velocity than combination of PTFE with graphite incorporated yarn with Aramid corner packings .
ZEBRA PTFE KEVLAR PACKING
PTFE Kevlar Composite braided packing was made of PTFE yarns and the reinforced Aramid of Aramid fiber. This structure, Enhances the lubricability of Aramid and reinforces the strength of the pure PTFE packing.
ZEBRA GRAPHITE-PTFE KEVLAR PACKING
high tensile strength aramid fiber and graphite impregnated PTFE self-lubricating fibers diagonally positioned and braided to produce a low friction, wear-resistant packings.
ZEBRA CARBONIZED KEVLAR PACKING
Kevlar and Carbon Composite Packing is made of High-quality special yarn, It was impregnated with PTFE emulsion, with corner of Kevlar fibre braided packing, this packing has better sliding velocity than combination of PTFE with graphite incorporated yarn with Aramid corner packings .It was processed with high temperature lubricant and impregnated PTFE emulsion. It is a a low friction, wear-resistant packing.