PRODUCTS
Please see our online catalog or contact our sales department for more information.
TANK LID SEALS PACKING RING
It is a multi-layer and multi-fiber braided packing ring.It consists of loosely braided polypropylene fibers. The inner core is NBR rubber, around which is wrapped additional PTFE tape. It is exceptionally resilient and an excellent choice for sealing against virtually all chemicals.
PURE PTFE PACKING
STYLE 6000EXP is made of 100% white exp anded PTFE yarn. It contains no impregnant , has no lubricant, and has no finsh treatment.
COTTON PTFE PACKING
Cotton Packings with PTFE Impregnation Made of long cotton fiber yarn impregnated with PTFE and additives. The packings has a low coefficient offriction & is resilient and flexible.(PH:4-10)
CARBON PTFE PACKING
STYLE 5600 is made of carbonized poly acrylonitrile fiber and fininshed with PTFE dispersion and lubricant.
KEVLAR PTFE PACKING
STYLE 6500 Aramiid fiber packing is made of Du Pont’s continuous filament kevlar yarn impregnated with PTFE emulsion and processed with lubricant.
PTFE-GRAPHITE WITH KEVLAR FIBER PACKING
STYLE 6500G is high-quality combination of PTFE with graphite incorporated yarn with corner of kevar fiber, to prevent gap extrusions with the high pressure and temperature range.
RAMIE PTFE PACKING
Ramie fiber is very soft and easy to be impregnated. It turn to be with higher strength, better anti-corrosion and attrition resistance after impregnation of PTFE dispersion. The packing made of ramie fiber has very slim attrition to the shaft, so it’s an ideal material to be used in sea water, clearn water with low temperature, low speed, and equipment with the media of food, oil, and fruit juicy, ect.
FIBERGLASS PTFE PACKING
It is diagonally braided by C or E-glass fiber yarns which are pre-impregnated by PTFE suspension liquid, afterward it will be re-impregnated by PTFE and lubricated by silicone oil, it is one of the most popular and ideal packings for the replacement of asbestos PTFE packing.
KYNOL FIBER PTFE PACKING
Braided from KynolTM fiber and PTFE fiber. It contains the advantage both PTFE and kynol. It has good strength and lubricates. It is a clean packing and high pressure conditions than using pure PTFE packings
RAMIE PTFE PACKING WITH OIL
Ramie PTFE Packing is made of ramie fiber impregnated with PTFE emulsion, and lubricant.
LUBRICANT PTFE PACKING
STYLE 6000W is Interlock braided PTFE yarn, Long lubricant squeezed out under operating pressure soft , self-lubrication, applicable for dynamic seal at high linear speed. Low coeffient of friction result in easy shaft running. In centrifugal pumps, control valves and special applicationsin the chemical, food stuffs and pharmaceutical industries.
PURE PTFE PACKING WITH SILICON CORE
STYLE 6000SC is Braided with 100% pure expanded PTFE yarn, reinforced with silicone rubber cords.
PTFE FILAMENT WITH PTFE PACKING
STYLE 6800 is Braided of pure PTFE filament yarns, impregnated with ptfe dispersion, firm high-density braided packing.
PTFE FILAMENT WITH OIL PACKING
STYLE 6800W is Braided from Pure PTFE filam yarns, impregnated with PTFE emulsion and lubricant.
GRAPHITE PTFE PACKING (SIMILIAR GFO)
STYLE 6200GFO was made from graphite-PTFE com pound without lubricant very good thermal conductivity. High flexibility and volumetric stability, no embrittlement or ageing. Long life with good operating efficiency. Gentle treatment of shafts
ACRYLIC PACKING WITH PTFE
STYLE 2200 was made from Synthetic Composite yarn, and impregnated with PTFE emulsion (No lubricants or oils),To provide extra chemical resitance,
ACRYLIC PACKING PTFE IMPREGNATED WITH LUBRICANT
STYLE 2400 braided from high strength synthetlc fiber pre-impregnated with PTFE, and impregnated during square brading , It has excellent properties of sealing, lubricating and resistance to chemicals,
ACRYLIC PTFE PACKING WITH GRAPHITE & LUBRICANT
ACRYLIC PTFE PACKING WITH GRAPHITE & NO LUBRICANT
