TOP SEALING manufactures a complete range of semi-metallic gasket, Reincorced Graphite Gasket, Spiral Wound Gasket, Metal Jacket Gasket,  Metal Kamprofile Serrated Gasket, Metal Corrugated Gasket. The metal is intended to offer strength and resiliency, while the non-metallic portion provides conformability and sealability. Semi-metallic are designed for almost all operating conditions and high-temperature and pressure applications, and are used on raised face, male-and-female, and tongue-and-groove flanges.

Spiral Wound Gaskets are made of a preformed thin metallic strip combined with a soft sealing composite material, wound together under pressure to energize the sealing element to act like a spring when compressed between two flange faces. The sealing element can be used stand-alone or in conjunction with inner and/or outer rings depending on the application.

Metal Kamprofile Serrated Gasket are suitable for the most difficult applications such as superheated steam, high pressure hydrocarbon or chemical service. These gaskets can be find from conventional Electric Power Plants as well as in the Nuclear Power Plants, chemical and petrochemical industries.

Metal Corrugated Gasket are suitable for demanding environments of valves, gas, heat exchangers applications. They can be manufactured in a wide range of shapes and with or without pass partition bars. The metal gasket are produced in several types to meet the most demanding applications and have shapes in Round, Oval, Rectangular, etc. Gaskets  consist of a carrier ring with layers on both sides - PTFE for use at temperatures of up to 250 °C, or graphite for temperatures of approx. 500 °C with atmospheric oxygen influx.